Ensure deal with unstable soil conditions in embankment construction meet requirements
Many times, the soil integrity for construction sites required for residential, commercial and industrial properties, infrastructure like roads, highways, bridges, railways, airport runways, ports, dock yards, and others is not conducive for building structures. Excessive settlement can take time for soft compressible soils like clay or silt clay with low permeability as they have a lower load bearing capacity.
To strengthen the weak saturated soil and to expedite preconstruction slow draining soil consolidation, a network of prefabricated vertical drains also called as ‘wick drains’ are used for creating drainage pathways into the pore soil. These wick drains are then laid vertically in soft soil with the help of a mandrel/ vibratory hammer /static method that are mounted on a crane or excavator. A surcharge or preloading program is then applied to accelerate the process of soil consolidation and settlement.
The prefabricated vertical drains are made up of a core material, usually of plastic that is wrapped with the spun-bond non-woven geotextiles as an outer layer and acts as a filter fabric. The geotextile filters the soil from entering the water channels and flooding the drain. Geotextiles are permeable fabrics which, when used in association with soil, have the ability to separate, filter, reinforce, protect, or drain. They have moulded channels that accelerate the soil consolidation process and help to siphon the trapped water in the soft soil strata and bring it to the surface. The duration taken for consolidation of the cohesive soil (sticky soil) depends on the quality of the geotextile, surcharge weight, soft or sand layer of soil and the design and strategic placement (gap between the drains) of the wicks.
In order to determine if a geotextile material is suitable for a particular application it must undergo appropriate mechanical testing procedures. The most common forces a geotextile experiences during its application are tensile and puncture. Each of these forces can cause the premature failure of a geotextile and lead to catastrophic events.
LIST OF OUR ACCREDITED PRECONSTRUCTION SOIL CONSOLIDATION TEST METHODS
A well tested good quality Geotextile/Prefabricated Vertical Drains (PVD) installation can have several benefits:
TÜV SÜD is a trusted, independent third-party solutions provider that carries out impartial analyses and tests of your structures. We carry a variety of tests on Geotextile/Prefabricated Vertical Drains (PVD) to ensure that your preconstruction soil consolidation through wicker drain installation will be conducted in a structured and seamless manner. This will help you mitigate the risk of delay in the project completion and accidents.
Our experts actively participate in the preparation of directives and standards governing safety of engineering structures. This ensures they are familiar with all relevant requirements and regulations. We have decades of international experience in the real estate and infrastructure sector. In addition, we are accredited according to ISO 17020 to conduct independent inspections for quality assurance.
Consumer trust is key when you manufacture or retail products that are part of everyone’s daily life
Select Your Location
Bosnia and Herzegovina